Cold Rolled Sheet VS Hot Rolled Sheet
Hot rolled plate refers to hot-rolled steel plate and strip, commonly known as hot plate, which refers to steel plate with width greater than or equal to 600mm and thickness of 0.35-200mm and steel strip with thickness of 1.2-25mm. Cold rolled sheet and hot rolled sheet are commonly used in our life. Let's see the difference between cold rolled sheet and hot rolled sheet!MORE
Wire Rod Rolling Mill Rolling Process Analysis
According to the rolling speed, there two types of wire rod rolling mills, one is normal rolling mill, the other one is high speed rolling mill, compare with the normal rolling mill, the high speed rolling mill requires higher technology for sure, about the wire rod rolling, there are some matters you have to pay attention to, the wire rod has the following characteristics, small cut surface, very...MORE
The Features Of Induction Furnace
The induction furnace is an electrical furnace in which the heat is applied by induction heating of metal. It is divided into two types: coreless induction furnace and channel induction furnace.MORE
Submerged Arc Furnace - Structure Characteristics
Submerged arc furnace is a kind of industrial furnace which consumes much power. Full set equipment mainly consists of a furnace shell, fume hoods, lining, short net, cooling system, exhaust system, de-dusting system, electrode shell.....MORE
Development of EAF Steelmaking
The development of EAF steelmaking can be divided into three stages。From the beginning of small EAF specialized in smelting alloy steel, to the later change to large EAF for smelting alloy steel and plain carbon steel, until the recent ultra-high power large (AC, DC) EAF only used as scrap melting equipment.MORE
Main Factors Influencing Graphite Electrode Consumption in EAF Steelmaking
The consumption of the graphite electrode in EAF steelmaking runs through the whole smelting process, and its consumption is affected by many factors, which is only analyzed for the operation of the smelting process.MORE
What Are the Major Risk Factors for Steelmaking?
The defects of the molten iron tank, molten steel tank, tundish (tank), slag tank equipment in electric arc furnace, improper operation, prone to explosion, burning. Therefore, the shell of molten iron tank, molten steel tank and tundish shall be provided with vent holes.MORE
What Is an Electric Arc Furnace?
An electric arc furnace, also known as an electric arc furnace (EAF), is a device that uses an electric arc to heat materials that are usually metals to the melting point. A typical electric arc furnace melts a material by passing an electric current through a set of electrodes, or "charge".MORE